Sony VGN-FJ270P User Manual
Page 2
VGN-FJ Series Hard Disk Drive
Replacement Instructions
P/N 994637100
Rev. B
2/2
Step 4. Using the enclosed
magnetic screwdriver, remove the
two (2) screws as indicated in the
picture.
CAUTION: Do not pull the
plastic tab before releasing the hard
drive from the connector!
Step 5. With even force slide out the
HDD as shown.
Some force may be
required to unlock the HDD from the
connector.
Step 6. Gently pull out the original
HDD away from the computer as
shown.
Step 7. Hold the new HDD by the
edges and slide it inside the
opening in an angle.
Step 8. Align the HDD with the
connector and with even force push
in the new HDD. Reinstall the two
(2) previously removed screws.
Step 9. Reinstall the HDD access
door previously removed.
Step 10. Reinstall the Battery Pack.
Reconnect the AC Adapter.
Step 11. Power on your computer
and continue with the recovery
process by following instructions
described on the back of the
recovery disk’s case.
Return the old HDD Bay to Sony
following the included shipping
instructions.
Fully
disconnect
before
removal of
HDD