Initializing the speaker, Help guide – Sony SRS-X2 User Manual

Page 92

Personal Audio System

SRS-X2

Initializing the speaker

With the speaker turned on, while holding the VOL (volume) - button, press and hold the

(power) button for 5

seconds, so as to turn the speaker off.

The speaker is initialized. Settings such as volume, etc., are restored to the factory default settings, and all pairing

information is deleted.

Note

To turn on the speaker after initializing it, connect the speaker to an AC outlet via the USB AC adaptor. If the speaker

is being powered by the built-in battery, it cannot be turned on.

4-540-810-11(1)

Troubleshooting