Sony LBT-XGR600 - Manual (Page 19)

Ti
mer
19 GB
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90 t 80 t 70 t … t 10 t
OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing (for up
to 100 minutes).
Other operations
** You cannot check the remaining time if you select
“AUTO”.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 7).
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 10).
• Tape: Load a tape.
• Tuner: Tune in the preset radio station
(see “Listening to the radio” on page 12).
2
Turn VOLUME (or press VOL +/– on the
remote) to adjust the volume.
3
Press c /CLOCK SET (or CLOCK/
TIMER SET on the remote).
“SET” appears and “DAILY SET” flashes.
4
Press ENTER.
“ON” appears and the hour indication
flashes.
5
Set the time to start playing.
Press M/m repeatedly to set the hour, then
press ENTER.
The minute indication flashes.
Press M/m repeatedly to set the minute,
then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
Press M/m repeatedly until the desired
sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8
Press ENTER.
The start time, the stop time, and the sound
source appear in turn, before the original
display returns.
9
Press ?/1 to turn off the system.
Timer
Falling asleep to music
— Sleep Timer
To Press
Check the
remaining time** SLEEP once.
Change the time
to turn off SLEEP repeatedly to select the
time you want.
Cancel the Sleep
Timer Function SLEEP repeatedly until “SLEEP
OFF” appears.
Waking up to music
— Daily Timer
t TUNER y CD PLAY T
t TAPE PLAY T
continued