Sony NW-S23 User Manual

Page 20

Playing specified
sentences repeatedly
(Sentence Repeat)

This function automatically detects only
voice data from the setting point and repeats
the voice data for setting counts. This is
useful for language-learning material which
has no background music.

Tip

The default repeat counts setting is 2 times for one
sentence. But you can change the repeat counts setting.
Refer to “Setting the repeat counts” on page 21.

Select the Sentence Repeat mode
(SENTENCE Rep) (page 17).

Press the

button to start

playback.

Repeat mode

Press the SOUND/REPEAT button
to place the setting point during
playback.

The Network Walkman detects spoken
sections and non-spoken sections from
the set point, and Sentence Repeat starts.
(The spoken section is repeated once (during
detection), and the setting is counted.)

0 1

Notes

• You cannot use Sentence Repeat in the Group

mode, or when the current time is displayed.

• A spoken or non-spoken section of less than 1

second will not be detected.

• If a non-spoken section is not detected until the

track end, the track end point is recognized as a
non-spoken section and Sentence Repeat begins
from the previous spoken section.

To clear the setting point

• Press the SOUND/REPEAT button during

Sentence Repeat playback.

• Press the MENU button during Sentence Repeat

playback.

• Select the Group mode by pressing the GROUP

button during Sentence Repeat playback.

• Select the previous or next track by pressing the

.–/+> button during Sentence Repeat
playback.

(The Sentence Repeat mode is not canceled.)

To cancel the Sentence Repeat mode

Change the Repeat mode in the menu screen (page
17).

button

–/+

button

SOUND/REPEAT
button