Sony VGN-A140B - Manual (Page 29)

To connect the wireless optical mouse
Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse.
When attempting to connect the wireless mouse, confirm that the AA batteries (supplied) are properly inserted into
the mouse before your computer is turned on.
1. Turn the wireless mouse over.
2. Slide the power button on the wireless mouse to the ON position.
Connecting the m ouse
3. Turn on your computer.
4. Reach underneath the right side of the computer and press the CONNECT button.
5. Immediately, press the CONNECT button on the wireless mouse.
Make sure to press the CONNECT button on the wireless mouse within 30 seconds after pressing the CONNECT
button on the computer. The wireless mouse must be within 12 inches of the computer.
Positioning the m ouse
6. Place the optical mouse on an appropriate surface to enable tracking.
Page 29