Display movie pb remaining – Sony DCR-DVD405 User Manual
Page 79
79
Usi
n
DATE/TIME
1Date
2Time
CAMERA DATA
3 SteadyShot off
4 Exposure
5 White balance
6 Gain
7 Shutter speed
8 Aperture value
9 Exposure value
•
appears for an image recorded using a flash.
• The data code is displayed on the TV screen if
you connect your camcorder to a TV.
• The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: DATE/TIME
t
CAMERA DATA
t OFF (no indication).
• Depending on the disc condition, bars [--:--:--]
appear.
• The setting returns to [OFF] when you set the
POWER switch to OFF (CHG) for more than 12
hours.
You can select the number of thumbnails that
appear on the VISUAL INDEX screen.
Thumbnail Glossary
B
ZOOM LINK
Change the number of thumbnails (6 or 12)
with the zoom lever on your camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander.
Because the default setting is [ON], when
you select
tab on the VISUAL INDEX
screen the first 5 seconds of each movie
displayed on the screen are played back in
sequence.
• Set to [OFF] to conserve battery power.
• Playback for the movie stops after repeating 5
times.
B
AUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
– When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to
(Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch to
(Movie).
– When the recordable time for movies is
less than 5 minutes.
– When you start recording from the line
input.
ON
Always displays the remaining disc
indicator.
Movie
Still image
DISPLAY
MOVIE PB
REMAINING