Sony DCR-DVD405 - Manual (Page 119)

119
Tr
o
ubl
es
hoo
ting
4 Double-click [Driver] t [Setup.exe].
For Windows 2000
1 Click [Start], [Settings], then [Control Panel].
2 Click [System].
The [System Properties] window appears.
3 Click [Hardware] tab.
4 Click [Device Manager].
The [Device Manager] window appears.
5 Make sure that [SONY DDX-C1002 USB Device] appears in [DVD/CD-ROM drives],
[Generic volume] in [Storage volumes], and [USB Mass Storage Device] in [Universal
Serial Bus controllers] respectively.
When all the devices appear, the USB driver is installed correctly. If any of these devices
are not shown, install USB driver.
1 Place the supplied CD-ROM in the disc drive on your computer.
2 Double-click [My Computer].
3 Right-click [PICTUREPACKAGE] icon (Disc drive)*, then click [Open].
*Drive names (such as (E:)) may vary depending on the computer.