Actiontec electronic IS560LH - Manual (Page 8)

8
Before installing the modem, you must enable ISA Plug-N-Play support within Win-
dows NT. First set your system BIOS to “PnP OS” and then insert the Windows NT
4.0 CD-ROM into your systems CD-ROM Drive. The Startup window for Win-
dows NT 4.0 should appear after a few moments. Click Browse This CD. Double-
click the Drvlib folder. From the new panel double-click on the Pnpisa folder. An-
other panel will appear. Double-click on the x86 folder. The contents of this folder
should contain a file labeled Pnpisa. Right-click the file’s icon and a pop-up menu
will appear. From this menu click Install. After ISA Plug-N-Play is enabled, restart
your system. When the system has restarted, in Control Panel double-click on the
Devices icon. Scroll down the new menu and highlight PnP ISA Enabler Driver.
Click the Startup button and select the System option. See Fig.4 below.
Fig. 4: Devices Window
Proceed to the section titled “Installing the Modem.”