Using basic functions, Setting up the tv automatically – Sony WEGA KV-27FS100 User Manual
Page 25
17
Using Basic Functions
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform Auto Program to set up your channels.
When Auto Programming, the TV will automatically search for available channels and program
receivable channels.
1
Press
to turn on the TV. The Initial Setup screen appears.
2
Press
on the remote control or on the TV front panel to perform Auto Program, or press
to exit.
To perform Auto Program again
1
Press .
2
Press
g
to highlight Channel Setup Menu.
3
Press
f
to highlight Cable. Press
to select.
4
Press
F
or
f
to select On or Off according to how you connected your TV. Press
.
5
Press
f
to highlight Auto Program. Press
to search for channels.
6
After performing Auto Program, press
to exit.
To reset the TV to factory settings
1
Turn the TV on.
2
Hold down
on the remote control.
3
Press and release the POWER button on the TV front panel. (The TV will turn itself off,
then back on.)
4
Release .
✍
The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
Initial Setup
Auto Program: [CH+]
[CH–]
First please connect
cable/antenna
Exit: