Sony DVP-NC600 - Manual (Page 26)

26
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver).
• Dolby Digital (5.1ch) (page 66)
• DTS (5.1ch) (page 66)
z To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” (page 30). If
your AV amplifier (receiver) has a DTS decoder, set “DTS” to “ON” (page 30). Otherwise, no sound or a loud noise
will come from the speakers.
Connecting to an AV amplifier (receiver) with a digital input jack having a
Dolby Digital or DTS decoder, and 6 speakers
Note
D