Sony DVP-NC600 User Manual

Page 24

This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or
DTS decoder, refer to page 26.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or
multichannel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use

. If your amplifier

(receiver) has a digital input jack, use

xRecommended surround sound effects using this connection with your amplifier (receiver).

• Dolby Surround (Pro Logic) (page 66)

For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and

3 to 6 speakers

C-1

C-2