beautypg.com

Configuring windows 95 – Actiontec electronic Plug n' Play Voice/Fax Modem V.90 ISA User Manual

Page 9

background image

9

Configuring Windows 95

Step 1

Upon start-up, Windows 95 detects the modem and displays the New Hard-

ware Found dialog box. Select “Driver from disk provided by hardware
manufacturer” then Click OK.

Step 2

Insert the diskette containing the modem’s Windows 95 .INF files and click
OK

Step 3

If Windows asks for an installation disk, click OK and type A: in the dialog
box that appears and click OK again.

Step 4

After the installer has copied the .INF files to the hard disk, a New Hard-

ware Found dialog box should appear prompting for the “Wave Device for
Voice Modem”. Click OK. (See “Do This First” for information on
UNIMODEM.INF if this screen does not appear).

See also other documents in the category Actiontec electronic Hardware: