Sony ERS-210B User Manual
Page 18
18
2
When the DHCP server function is not used in the network
#
# WLAN
#
HOSTNAME=AIBO
ESSID=AIBONET
WEPENABLE=1
WEPKEY=AIBO2
APMODE=1
#
# IP network
#
#USE_DHCP=1
#
# If DHCP is not used (USE_DHCP=0), you need to specify IP
# network configuration.
#
USE_DHCP=0
ETHER_IP=192.168.0.11
ETHER_NETMASK=255.255.255.0
IP_GATEWAY=192.168.0.1
DNS_SERVER_1=192.168.0.1
#
# SSDP
#
SSDP_ENABLE=1
For each parameter, refer to “List of WLANCONF.TXT parameters” on page 64.
<
Set the SSID for Wireless LAN access point (less than 32 characters).
<
Set the WEPKEY for Wireless LAN access point (less than 5 characters).
<
Delete # at the head of the line.
<
Enter the AIBO IP address*.
<
Enter the sub-net mask for AIBO.
Enter the IP address for the router.
* For confirming the AIBO IP address, refer to page 16.
Lines that start with a sharp symbol (#)
are recognized as a comment line and
are thus ignored.