Sony ERS-210B - Manual (Page 16)

16
Confirm if the DHCP server function is used in the network.
(This procedure is for Windows XP only. For other operating systems, please refer to
the software help information.)
1 Click the Start button and select Control-Panel.
2 Select Network & Internet Connections, and Network Connections.
3 Right click Network Connection, and select Properties.
4 In "This connection uses the following items" select Internet Protocol
(TCP/IP) and click the Properties button.
5 Confirm the settings.
If Obtain an IP Address automatically is selected,
the DHCP server function is used.
If Use the following IP address is selected,
the DHCP server function is not used.
In this case, you must enter the IP address manually as follows:
Record the PC IP address that is displayed, and then change it to the AIBO IP
address to avoid IP address duplication within the network.
Example: PC IP adress:
192.168.0.10
AIBO IP adress: 192.168.0.11