Sony FWD-50PX3 - Manual (Page 58)

12 GB
Remote Control
Button Description
• The 5 button and button have a tactile dot. Use the tactile dot as a reference when operating the display.
• Insert two size AA (R6) batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the remote control’s
battery compartment.
1 POWER ON switch
Press to turn the display on.
2 DVI button
Press to select the signal input to the DVI IN port.
3 HDMI button
You cannot use this button on this display.
4 S VIDEO button
Press to select the signal input to the S VIDEO IN connector from a
piece of video equipment.
5 VIDEO button
Press to select the signal input to the VIDEO IN connector from a
piece of video equipment.
6 PICTURE button
Selects “Picture Mode”. Each press toggles between “Vivid”,
“Standard”, “Custom”, and “Conference”.
7 F/f/G/g/ buttons
The F/f/G/g buttons move the menu cursor (yellow) and set values,
etc. Pressing sets the selected menu or setting items.
In the “PAP” mode, you can switch the active picture with G/g .
8 button
Press to change the aspect ratio. See page 14.
9 MENU button
Press to show menus. Press again to hide them. See page 19.
Notes
,
Push and slide to open