Sony FWD-50PX3 - Manual (Page 54)

8 GB
Side Panel
Connector Description
1 REMOTE
(10BASE-T/100BASE-TX)
Serves to connect the display to a network, using a 10BASE-T/100BASE-TX LAN cable.
You can assign various settings and control the display via the network from a PC.
For safety, do not connect the connector for peripheral device wiring that might have
excessive voltage to this port. Follow the instructions for this port.
When using this connector, select “Display” in “Network Port”. (page 30)
2 AUDIO OUT L/R
(RCA pin jack)
Outputs an audio of the signal currently indicated on the screen. Outputs an audio signal
corresponding to the active* picture while in the “P&P” or “PinP” mode.
Settings assigned in “Sound Mode” will not be reflected.
OPTION 2 slot
(VIDEO)
OPTION 1 slot
(VIDEO/COM)
Caution
Note
Note