Sony FWD-50PX3 User Manual
Page 55
9
GB
GB
* The status when the sound is output and the input signal can be switched.
3
HD15 IN
(D-sub 15-pin)
RGB/COMPONENT: Connects to the analog RGB signal or component signal output of
a piece of video equipment or PC. See page 42.
AUDIO: Inputs an audio signal. Connects to the audio signal output of a piece of video
equipment or PC.
When inputting a component signal, be sure not to input sync signals to pins 13 and 14. If
you do so, the picture may not be displayed properly.
4
DVI IN
(DVI-D 24-pin)
DVI: Connects to the digital RGB signal output of video equipment. Supports HDCP
copy protection.
AUDIO: Inputs an audio signal. Connects to the audio signal output of a piece of video
equipment, etc.
5
MONITOR CONTROL
ADAPTOR
(The BKM-FW21 is pre-
installed.)
CONTROL S IN/OUT (Mini jack): You can control pieces of multiple equipment with a
single remote control when the display is connected to the CONTROL S connector of the
video equipment or another display. Connect the CONTROL S OUT connector on this
display to the CONTROL S IN connector of the other equipment, and connect the
CONTROL S IN connector on this display to the CONTROL S OUT connector of the
other equipment.
REMOTE (D-sub 9-pin): This connector allows remote control of the display using the
RS-232C protocol. For details, contact your authorized Sony dealers.
• This adaptor won’t work when installed in the OPTION 2 slot.
• The REMOTE connector and the REMOTE (LAN) connector of 1 cannot be used at
the same time.
• When using the REMOTE connector, select “Option1” in “Network Port”. (page 30)
6
OPTION 1 slot
(VIDEO/COM port)
This slot supports video signals and communication functions. By installing an optional
adaptor (the BKM-FW series) in this slot, you can expand the input signal connectors or
control the display via the network.
7
VIDEO INPUT
ADAPTOR
(The BKM-FW10 is pre-
installed.)
S VIDEO IN (Mini DIN 4-pin): Connects to the S Video output of a piece of video
equipment.
S VIDEO OUT (Mini DIN 4-pin): Connects to the S Video input of a piece of video
equipment. Pictures input from S VIDEO IN will be output.
VIDEO IN (BNC): Connects to the video output of a piece of video equipment.
VIDEO OUT (BNC): Connects to the video input of a piece of video equipment. Pictures
input from VIDEO IN will be output.
AUDIO IN L/R (Pin jack): Connects to the audio output of a piece of video equipment.
8
OPTION 2 slot
(VIDEO port)
This slot supports video signals. You can install an optional adaptor with video signal
input/output function into this slot. The optional adaptor with communication functions
should be installed in 6 OPTION 1 slot.
Connector
Description
Note
Notes