Sony STR-DH750 User Manual
Page 4

..................................................................................................
Adjusting the sound balance automatically (Auto Calibration)
........................................
Using bi-amplifier connections (for STR-DH750 only)
....................................................
Checking information on the receiver
.....................................................................................
Viewing information on the display panel
.......................................................................
Setting up the receiver using the Easy Setup
...................................................................
............................................................................................
Selecting the Auto Calibration type (Calibration Type)
.....................................................
Selecting the speaker pattern (Speaker Pattern)
............................................................
Setting the assignment for the speaker terminals (SB Assign) (for STR-
Adjusting the speaker level (Manual Setup)
...................................................................
Adjusting the speaker size (Manual Setup)
....................................................................
Adjusting the speaker distance (Manual Setup)
.............................................................
Setting the crossover frequency of the speakers (Crossover Freq.)
..............................
Outputting a test tone from each speaker (Test Tone)
...................................................
Selecting the unit of measurement (Distance Unit)
........................................................
Enjoying clear sound at a low volume level (Night Mode)
................................................
Adjusting the equalizer (Equalizer)
...................................................................................
Selecting a sound field (Sound Field)
...............................................................................
Synchronizing audio with video output (A/V Sync.)
........................................................
Adjusting the volume automatically (Auto Volume)
........................................................
Selecting the language of digital broadcasts (Dual Mono)
.............................................
Compressing the dynamic range (D.Range Comp.)
.......................................................
Controlling HDMI devices (Control for HDMI)
.................................................................
Passing HDMI signals through (Pass Through)
..............................................................
Setting the HDMI audio signal output of connected devices (HDMI Audio
Setting the level of the subwoofer (Subwoofer Level)
....................................................
Speeding up the display when switching the HDMI input (Fast View)
Automatically switching the input when an MHL device is played (MHL
TOC-3