Performing auto calibration, Help guide – Sony STR-DH750 User Manual
Page 121
MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Performing Auto Calibration
You can perform automatic calibration from where you are sitting.
1. Select [Settings] - [Speaker Settings] from the home menu.
2. Select [Auto Calibration].
3. Follow the instructions on the TV screen, then press to select [Start].
The measurement starts in 5 seconds.
The measurement process will take approximately 30 seconds with a test tone.
When the measurement ends, a beep sounds and the screen switches.
4. Select the item you want.
Retry:
Performs the Auto Calibration again.
Save&Exit:
Saves the measurement results and exits the setting process.
WRN Check:
Displays warning related to the measurement results. See “
.”
Exit:
Exits the setting process without saving the measurement results.
For details on the measurement results, see “
Checking Auto Calibration results
5. Save the measurement results.
Select [Save&Exit] in step 4.
Note
If an error code or warning message appears on the screen in step 3, see “
.”
This setting is not available when headphones are connected.
Hint
The Auto Calibration function will be canceled if you perform the following during the measurement process:
Press
.
Press the input buttons on the remote control or turn the INPUT SELECTOR on the receiver.
Press .
Press SPEAKERS on the receiver.
Change the volume level.
Connect headphones.
Related Topic
114