Sony DCR-HC1000 - Manual (Page 112)

Troubleshooting 112
Dubbing/Editing
Cannot mark pictures for print. cWhen you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 122)
cPerform the operation again on the index screen. (p. 102)
• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.
The data file name is not indicated
correctly. • Only the file name is displayed if the directory structure does not
conform to the universal standard.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 121)
The data file name flashes. • The file is damaged.
• The file format is not supported on your camcorder. (p. 121)
Symptom Cause and/or Corrective Actions
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder. cSet [VIDEO INPUT] to the appropriate signal in the (STANDARD
SET) menu. (p. 78)
cSet [DISPLAY] to [LCD PANEL] in the (STANDARD SET)
menu. (p. 80)
Cannot dub correctly using the A/V
connecting cable. cSet [VIDEO INPUT] to the appropriate signal in the (STANDARD
SET) menu. (p. 78)
cSet [DISPLAY] to [LCD PANEL] in the (STANDARD SET)
menu. (p. 80)
• The A/V connecting cable is not connected properly.
cMake sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.
Pictures from connected devices are
not displayed correctly. • The input signal is not NTSC. (p. 119)
New sound added to a recorded tape
is not heard. cIn the (STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1/FRONT] (original sound) side until the sound is heard
appropriately. (p. 77)
A title is not recorded/A cassette label
is not recorded. cUse a cassette with Cassette Memory. (p. 120)
cErase unnecessary titles when the Cassette Memory is full. (p. 74)
cSet the write-protect tab to REC. (p. 120)
• A title cannot be added to a blank section of the tape.
The title is not displayed. cSet [ TITLE DISP] to [ON] in the (EDIT/PLAY) menu.
(p. 75)
The title cannot be deleted. cSet the write-protect tab to REC. (p. 120)
Symptom Cause and/or Corrective Actions