Connecting the wireless mouse, User guide – Sony SVT21223CYB User Manual

Page 309

Personal Computer

VAIO Tap 21

SVT2122

Connecting the Wireless Mouse

If you cannot use the wireless mouse supplied with your VAIO computer, it is likely that wireless connection setup is

required between the wireless mouse and the computer.

1. Check that an AA battery is inserted in the wireless mouse you want to connect, and then slide the mouse’s power

switch to

OFF.

2. While pressing and holding the central wheel of the mouse, slide the mouse’s power switch to

ON.

The status light turns on. Keep the central wheel pressed.

3. Turn on your VAIO computer. While the VAIO logo is displayed, press and hold the central wheel of the mouse and

put the mouse immediately in front of your computer’s screen.

The status light turns off and the connection is then established.

About turning on your VAIO computer, see

for more information.

Note

The connection procedure is not usually required to use the wireless mouse with your VAIO computer.

Do not perform the connection procedure if you can use the wireless mouse normally. Doing so may cause computer

malfunction.