Sony DCR-PC5 - Manual (Page 114)

114
Viewing a still picture
– Memory photo playback
You can play back still images recorded on a “Memory Stick”. You can also play back 6
images at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Press PLAY (p. 99). The last recorded image is displayed.
(3) Press –/+ on your camcorder or the Remote Commander to select the desired
still image.
– : to see the previous image
+ : to see the next image
1 2
PLAY
POWER LOCK
VCR
MEMORY
CAMERA
OFF
LOCK
To stop memory photo playback
Press CAM.
Notes on the file name
• The directory is not displayed if the structure of the directory does not conform to the
DCF98 standard.
• “ - DIRECTORY ERROR” may appear on the LCD screen if the file does not
conform to the DCF98 standard. While this message appears, you can play back
images but cannot record them on the “Memory Stick”.
• The file name flashes on the LCD screen if the file is corrupted or the file is unreadable.
To play back recorded images on a TV screen
• Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before the operation.
• When operating memory photo playback on a TV or on the LCD screen, the image
quality may appear to have deteriorated. This is not a malfunction. The image data is
as good as ever.
• Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
• The message “ NO FILE” appears when no image is recorded on the “Memory
Stick”.
Recording date
When you operate DATA CODE on the LCD screen or on the Remote Commander, you
can see the recording date. However, you cannot see the various settings.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
Still image
You can select still images also with –/+ on PAGE1/PAGE2/PAGE3.