Sony STR-DN1050 User Manual

Page 94

Text mode
Original mode

2. Set [SB Speaker Assign] in the Speaker Settings menu to [Front B].

You can select the front speaker system you want by using the SPEAKERS button on the receiver.
You can connect the front speakers to this terminal using a bi-amplifier connection. In this case, set [SB Speaker
Assign] in the Speaker Settings menu to [Bi-Amp].

Note

After you have installed and connected your speakers, be sure to select the speaker pattern you want using [Speaker
Connection] in the Speaker Settings menu.

Related Topic

Notes on connecting cables

Using bi-amplifier connections

Connecting the speakers in zone 2 (for STR-DN1050 only)

Connecting another amplifier in zone 2 (for STR-DN1050 only)

Selecting the speaker pattern and setting the assignment for the speaker terminals (Speaker Connection/SB Speaker
Assign)

Notes on use

4-488-938-11(1)