Cannot connect the receiver to a service, Help guide – Sony STR-DN1050 User Manual

Page 334

Text mode
Original mode

MULTI CHANNEL AV RECEIVER

STR-DN1050/STR-DN850

Cannot connect the receiver to a service.

Make sure that the router or the wireless LAN router/access point is turned on.
Check the network information. If [Not Connected] appears, set up the network connection again.
If the system is connected to a wireless network, move the receiver and the wireless LAN router/access point closer
to each other.
If your contract with your Internet provider limits Internet connection to one device at a time, this device will not be
able to access the Internet when another device is already connected. Consult your carrier or service provider.