Sony STR-DN1050 User Manual
Page 9

.................................................................................................
.........................................................................................
List of messages after Auto Calibration measurements
.................................................
...............................................................................................
........................................................................................
The receiver is turned off automatically.
.........................................................................
.........................................................................................
No 3D image appears on the TV.
...................................................................................
No 4K image appears on the TV.
...................................................................................
No image is output from the TV when the receiver is in standby mode.
The GUI menu does not appear on the TV screen.
........................................................
The display panel is turned off.
.......................................................................................
No sound or only a very low level of sound is heard, no matter which
There is severe humming or noise.
................................................................................
No sound or only a very low level of sound is heard from specific
There is no sound from a specific device.
......................................................................
The left and right sound is unbalanced or reversed.
.......................................................
Dolby Digital or DTS multi-channel sound is not reproduced.
........................................
The surround effect cannot be obtained.
........................................................................
A test tone is not output from the speakers.
...................................................................
A test tone is output from a different speaker than the speaker displayed
No sound is output from the TV when the receiver is in standby mode.
TOC-7