Atlantis Land i I-Fly Wireless Access Point - Manual (Page 19)

15
2 AP Client: Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a single computer
station (no driver installation is need) to join a wireless ESS network through it. You must make
sure SSID and Channel is set the same as that AP you wish to connect.
Remote AP SSID: key in
the LAN Mac address (NOT wireless Mac address) of the AP that you wish to get connected.
Please note that if you leave Mac address as 000000000000, then you will get connected by the
SSID that is set in you AP. In figure an example of configuration.