Sony ALT-A33PC - Manual

©2009 Sony Corporation Printed in China
4-152-320-11(1)
English
To stabilize S-AIR reception
Read the following when S-AIR reception is poor or unstable.
About environments where S-AIR products (S-AIR main unit and sub
unit) are used
S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may
cause lost connection or instability in S-AIR reception.
 Electronic equipment influence
The following may cause interference or cross talk.
Cellular phones, cordless phones
Wireless LAN, personal computers
Game machines using radio signals
Microwave ovens
 Other factors
The following may cause poor reception.
Materials or structures, such as walls and floors
The location where an S-AIR product is placed
When using S-AIR products, place them as far as possible from the above electronic equipment, or
place where S-AIR reception is stable.
–
–
–
–
–
–
When S-AIR reception is poor
Check the following.
Keep cords that are connected to the S-AIR product (AC power adaptor cord, audio cable or other
cords) away from the wireless transceiver and slot.
Keep as much space as possible around S-AIR products.
Avoid placing S-AIR products on top of, or directly below, other electronic equipment.
Avoid placing S-AIR products in a closed rack, metal rack, or under a table.
Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is
the most stable.
Place so that the AIR-PC10T and the S-AIR sub unit are closer.
Place so that S-AIR products are separated from other wireless devices.
Place so that S-AIR products are separated from metal doors or tables.
If you cannot improve S-AIR reception, change the “RF CHANGE” setting. For details, refer to the
operating instructions of each S-AIR product.
ALT-A33PC