Ask Proxima DP5800 - Manual (Page 5)

USING THE LASER F/X REMOTE CONTROL
For best results, aim the remote control at the projection screen or at the
projector’s front panel. Do not obstruct the red infrared eye located on the
front of the projector.
Use the Laser F/X controls as described in the tables above. Refer to your
projector User’s Guide for more information about specific projector
functions, in particular, how to connect the projector to your PC or Mac
and how to use the remote to control the mouse.
MAINTENANCE
Your Laser F/X remote control should be protected from water, dust and
heat. If the projected laser beam appears blurred or distorted, clean the
output window with an alcohol-dipped cotton swab. Like all electronic
equipment, your Laser F/X remote control should be handled with care.
CHANGING BATTERIES
To install or change the two AAA alkaline
batteries in the remote control unit:
1 Locate the battery compartment at the lower
rear of the base. Slide the cover open.
2 Remove the old batteries and replace them
with new ones. Make sure to align the
batteries in the proper +/- orientation.
3 Replace the cover on the battery
compartment.