Sony RHT-S10 - Manual (Page 12)

12 US
• The DIGITAL IN OPTICAL jack has priority when
you connect both the audio output of the TV to the
DIGITAL IN OPTICAL and ANALOG IN jack of the
system.
Depending on the audio output settings of the
connected component, the sound may output in 2
channel sound format only. In this case, set the
connected component to output the sound in
multi channel sound format (PCM, DTS, Dolby
Digital). For details on audio output settings,
refer to the operating instructions supplied with
the connected component.
Note
Setting up the sound
output of the connected
component