ACR Electronics Nauticast 2607 - Manual (Page 45)

Installation Manual 41 Y1-03-0204 Rev.K
Enter the new Password:
Repeat the new Password:
A minimum of 6, a maximum of 8 characters are allowed. Should the new password include
numbers, use the shift key to generate them.
Press Save to store the changes.
5 Troubleshooting
5.1 Reading and understanding Alarms:
The NAUTICAST differentiates between Alarm and TXT messages. An Alarm informs the
user about major system malfunctions and failings in the connected sensors.
The Alarm Status informs the user about all active Alarms. The Alarm will be disabled and
deleted from the Alarm Status, as soon as the displayed problem has been rectified.
The TXT status displays additional sensor information and the UTC clock status.
See tables (Chapter 5.2 & 5.3) for Alarm and TXT Messages.
Select “AIS Status” with cursor button [Up] & [Down]
or press Nr. 2 on the keyboard.
N 1 o 25' E 0 o 18' |1>0.10|2>1.30|3>1.80nm
******* Change User Password ***********
Enter new password :
Repeat new password:
{Length: 6..8 characters}
----------------------------------------
| Save | | | Back
N 1 o 21' E 0 o 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6-2. User Password Settings
-----| |
| +- 1. Change User Password
View | +- 2. Change Password Protection
|
-----|
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back