beautypg.com

ACR Electronics Nauticast 2607 User Manual

Page 35

background image

Installation Manual

31

Y1-03-0204 Rev.K

GPS module:

The screen provides means to switch the GPS Module between the „<µBlox>‟ or „‟.
You can force the AIS to search again for the GPS Module installed. Selecting the wrong type
of GPS module may result in invalid position information and/or malfunction so that your AIS
can not operate correct. Select and with [Left] & [Right] arrows the option to
search which module is installed Please mention the system will restart automatically when
saving these setting later. .

Position Pinning:

The screen provides means to switch the position pinning function of the internal GPS
receiver on and off. For vessels operating with SOG < 0,3 knots it is recommended to switch
position pinning off. Otherwise the internal GPS receiver may deliver wrong position
information.
The data input field is fitted with the recommended default value (). The M6 button is
used for toggling between the two modes of position pinning; the M5 button is used for saving
the settings.

NOTE: The system will be restarted after saving the settings.

<µBlox> GPS Receiver:

This GPS receiver is installed in later versions of NAUTICAST. It is designed for use with
passive and active antennas. The recommended GPS antenna should have a minimum gain
of 15 - 20 dB to compensate signal loss in RF cable. The supplied ACR

– GPS antenna is a

active type and has a gain of +30dB it is able to dive cable lengths of 45 meters. Antennas
with more than 50 dB should not be used. This high signal level can damage the GPS
receiver.


GPS receiver:

As described above, the resulting installation gain should be between 0 to 10 dB. If the
internal GPS receiver will be overloaded with more than 18dB, then it could be damaged.
Attenuation values

Type

Name

Part number Total gain

GPS-Antenna

GPS-Antenna Marina 2

2625

+35dBi

GPS-Antenna

Procom GPS4

2622

+35dBi

Comb. GPS/VHF-Antenna

Comrod AC-17

2624

+20dBi (GPS amp gain)

Cable

RG214

2630

-15,75 dB

Adapter

GPS-VHF Adapter cable with
1m RG58 / TNC connector

2612

-1dB

Connector

TNC plug RG214 crimp

2633

-0,1dB

Example

Procom GPS4

+ 35,00dBi

11m RG214 0,35 dB/m

- 3,85dB

maybe 2 TNC plugs

- 0,20dB

Nauticast with Adapter P/N 2610

-1,00dB

Total

29,95dB

Necessary minimum attenuation (=> 12dB Attenuator needed!)

≥11,95dB

GPS Input

≤18,00dB

This manual is related to the following products: