Installing the speakers, Step 1 step 3 step 2 – Sony CHC-P33D User Manual
Page 3

Chapter 1: Setting up
5
GB
AM loop aerial
Do this connection last!
to a wall outlet
FM lead aerial
Superwoofer
Right satellite speaker
Left satellite speaker
to a wall
outlet
STEP 3
Connecting the
Power
Connect the mains lead to a wall outlet
after you have made all the above
connections.
continue to next page ➔
2 Install the superwoofer between the
satellite speakers with its front panel
facing upward.
When installing the satellite
speakers away from each other
Position the satellite speakers so they face
toward your listening position.
STEP 1
STEP 3
STEP 2
Note
Do not install the woofer close to the unit,
and do not place the woofer above or
below the unit. Otherwise, the vibration
from the woofer may cause mechanical
noise or “skipping”.
When installing the speakers on
either side of the main unit
Place the superwoofer between the two
satellite speakers.
When installing the satellite
speakers away the superwoofer
1 Insert the supplied stand into the rear of
the superwoofer.
Installing the
Speakers
Proper speaker positioning is essential in
order to achieve directional effects and
diffused ambience.
When you install the speakers, refer to the
following instructions.
Once you have determined the final
placement, fasten the speakers to the
speaker stands.
=
+