beautypg.com

The set setting menu, Status (on-screen display), Input-a – Sony VPL-PX1 User Manual

Page 23: Language, Speaker, Power saving, Sircs receiver

background image

23

(GB)

Since the data is recalled from the preset memory
about the following signals, you can use these preset
data by adjusting SIZE. Make fine adjustment by
adjusting SHIFT.

Signal

Memory No.

SIZE

Super Mac-2

23

1312

SGI-1

23

1320

Macintosh 19”

25

1328

Macintosh 21”

28

1456

Sony News

36

1708

PC-9821

36

1600

1280

×

1024

WS Sunmicro

37

1664

Note

When the aspect ratio of input signal is other than 4:3,
a part of the screen is displayed in black.

The SET SETTING Menu

The SET SETTING menu is used for changing the
settings of the projector.

Operation

1. Select an item

Use the

M or m key to select the item, then press the

, or ENTER key.

2. Change the setting

Press the

M or m key to change the setting.

To restore the original screen, press the ENTER or

<

key.

STATUS (on-screen display)

Sets up the on-screen display.

ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the

menus, a message when turning off the power,
and warning messages.

For details on the warning messages, see page 27 (GB).

INPUT-A

Selects the RGB or component signal input from the
INPUT A connector.

Note

If the setting is not correct, “Please check INPUT-A in
SET SETTING.” appears on the screen and the color
of the picture becomes strange or the picture is not
displayed.

LANGUAGE

Selects the language used in the menu and on-screen
displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.

SPEAKER

Set to OFF to cut off the sound of the internal
speakers. When set to OFF, “SPEAKER OFF”
appears on the screen when you turn on the power.

POWER SAVING

When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes.

SIRCS RECEIVER

Selects the remote control detectors (SIRCS receiver)
on the front and rear of the projector.

FRONT & REAR: Activates both the front and rear

detectors.

FRONT: Activates the front detector only.
REAR: Activates the rear detector only.

I N P U T – A

S E T S E T T I N G

S T A T U S : O N

L A N G U A G E : E N G L I S H

S P E A K E R : O N
P OW E R S A V I N G : O F F
S I R C S R E C E I V E R : F R O N T & R E A R

I N P U T – A : R G B

The INPUT SETTING Menu / The SET SETTING Menu