AMX Network Device TX-CTB - Manual (Page 9)

Using the TX-CTB
5 TX-CTB Classroom Transmitter and Barcode Reader
Laser Disc
The selected source must accept a Chapter and/or Frame command.
! Chapter: To play a specific chapter, press CHAPTER, the chapter number then ENTER.
! Frame: To play a specified frame, press FRAME, the fame number, then ENTER.
! Clear: To cancel commands, press CLEAR, then ENTER.
! Audio: To control audio, press ALT and one of the following number buttons:
VCR
1. To access an optional feature, press ALT,
2. Then, choose one of the following number buttons and press ENTER:
CD-I Player
To control the CD-I mouse, use the buttons labeled in yellow. Then, press one of the eight outer
number buttons (1 – 4 or 6 – 9). Select from four mouse speeds.
5 increases mouse speed while 0 decreases it.
To activate CD-I functions:
! Press the right button (ENTER) or the left button (CLEAR) to activate the first CD-
I function button.
! Press the right button (FRAME) or the left button (CHAPTER) to activate the
second CD-I function button.
1 Left channel (analog)
2 Right channel (analog)
3 Both channels
4 All channels mute (analog)
5 Left channel (digital)
6 Right channel (digital)
7 Both channels (digital)
8 All channels mute (digital)
9 Text display on
0 Side A/B select (if available)
4 Tracking up
5 Tracking down
6 Reset counter
7 Clear
9 Text display on/off