Avaya 15-601075 - Manual (Page 12)

2402/5402 Phone Page 12
15-601075 Issue 05a (16 July 2009) IP Office
2. Call Handling
2.1 Answering a Call
When a call arrives at your phone, you hear a ringing tone and a flashing bell icon ( ) appears on the associated call
appearance display. The following describes how to use your handset to answer calls. To answer calls using a headset,
see Headset Working.
To answer an incoming call:
Do one of the following:
· If you are not active on another call, answer the call by lifting your handset.
You can also press SPEAKER to listen to the incoming call. However, you must use the handset to speak to the
caller. The phone does not have a built-in microphone.
· If you are active on a call already, place the active call on HOLD and then answer the incoming call (see Hold
).
To answer a call at another extension:
You can answer from your own phone by using Call Pick-Up; lift your handset and dial:
· *30, to answer a call ringing anywhere.
· *31, to answer a call within your group.
· *32*201#, to answer the call for a particular extension, in this example 201.
The default ringing cadences are:
· Internal calls - single ring cadence.
· External calls - double ring cadence.
These can be changed by your system administrator.
Note
· If your phone rings for longer than a specified period (15 seconds in default), any re-direction feature that you have
activated (such as voicemail or call forwarding) will come into effect.
16