AT&T 7720 - Manual (Page 24)

22
TELEPHONE MEMORY
Storing a Name with a Number
1 Follow steps 1–5 under “Storing Numbers in Memory.”
2 Use the keypad to enter a name. To enter the first letter on a key,
press the key once. To enter the second letter on the key, press the
key twice. To enter the third or fourth letter on the key, press the
key three or four times. (To enter subsequent letters from the same
key, select
SPACE once to move the cursor. Select SPACE twice to
insert a space.)
3 Use the softkey to select DONE when you are finished entering letters.
4 Enter a two-digit memory location (01–20).
Memory Match
Names stored in memory will appear in your incoming Caller ID as stored
in your memory. For example, if you store your parent’s telephone
number with their name (“Mom and Dad”) in memory, the Caller ID
display will show
MOM AND DAD whenever you receive an incoming call
from their stored phone number.
Viewing Numbers in Memory
1 Press U.
2 Select the following softkeys in sequence: NEXT, DIRECTORY, MEM, and
VIEW.
3 Press + or - to scroll through memory
— OR —
Enter the two-digit memory location (01–20).
4 Press U to exit.
NOTE: Press D to dial the number displayed on the screen.
Dialing Memory Numbers
1 Press
P.
2 Use the softkey to select MEM.
3 Enter the two-digit memory location (01–20).