Sony SCD-CE595 - Manual (Page 19)

Pla
y
ing D
iscs
19 GB
Note
Speaker distance cannot be adjusted in the following
cases.
– When the player is reading the disc information of
CD (or the CD area of Super Audio CD)
– When the player is reading the 2 channel area of
Super Audio CD
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) until “SPK
DIST” appears in the display.
3
Press l AMS L (or ENTER on the
remote).
4
Turn l AMS L (or press ./>
on the remote repeatedly) until the
desired item appears in the display.
Select the item from “FRT DIST”, “SURR
DIST”, “CNTR DIST” or “SW DIST”.
Note
When you set the sub woofer to “––” in the Multi-
channel mode (page 16), “SW DIST” cannot be
adjusted (“NOT IN USE” appears). Similarly,
“CNTR DIST” cannot be adjusted (“NOT IN
USE” appears) when you set the center speaker to
“––”.
5
Press l AMS L (or ENTER on the
remote).
The speaker distance adjustment display
appears.
Example:
When you select “SURR DIST” (with
“DIST UNIT” set to “SEL–METER”).
6
Turn l AMS L (or press ./>
on the remote repeatedly) to adjust the
speaker distance.
7
Press l AMS L (or ENTER on the
remote).
The player status returns to Step 4.
Repeat Steps 4 through 7 for more
adjustments.
8
Press MENU on the player after you
finish adjusting.
The display returns to the normal display.
Selecting the distance unit
In Step 4 above, select “DIST UNIT”.
Turn l AMS L (or press ./> on
the remote) to select “SEL–METER” or “SEL–
FEET”, then press l AMS L (or ENTER
on the remote).
Setting speaker distances back
to the default
Set all speaker distances to 3 meters (10 feet).