ATEN ATEN Matrix KVM KM0832 - Manual (Page 120)

KM0832 User Manual
110
(continued from previous page)
Setting Function
SET BEEPER When activated, the beeper sounds whenever a KVM port is
changed, when activating the Auto Scan mode (see F7 SCAN,
p. 121), or an invalid entry is made on an OSD menu. The
default is Y (activated). Choices are Y (Yes), or N (No).
IDLE TIMEOUT If there is no input from the KVM console accessing a particular
KVM port for the amount of time set with this function, the KVM
port is released, allowing it to be accessed by the other KVM
consoles.
To set the timeout value, key in a number from 0–240 seconds,
then press [Enter].
If the number is 0 [zero], this function is disabled. The default is
5 seconds.
RESTORE USER
DEFAULT Selecting this restores the original factory default settings for
VIEW and SET for the user profile. Choices are Y (Yes), or N
(No).