Sony VGP-WKB1 - Manual (Page 51)

13 GB
Continued on next page
Enabling communication between the keyboard and
mouse and the receiver
Note
Place the keyboard and receiver within the communication range given in the
specifications.
1
Set the keyboard POWER switch to ON.
2
Set the keyboard POINTING DEVICE switch to ON.
3
Set the mouse ON/OFF(power) switch to ON.
4
Press the CONNECT button on the receiver.
It may require up to 30 seconds for the receiver to recognize the
keyboard and mouse.
5
Press the CONNECT button on the keyboard.
Communication between the keyboard and the receiver starts.
6
Press the CONNECT button on the receiver again.
CONNECT button
CONNECT button