Asus K8N - Manual (Page 49)

ASUS K8N motherboard 2-15
2.4.2 JumperFree Configuration
Configure System Frequency/Voltage
AI Overclock Tuner [Standard]
AGP Overclock in MHz [ 66]
DDR RAM Voltage [Auto]
AGP Voltage [1.5V]
AI Overclock Tuner [Standard]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Select either one of the preset overclocking options and the relevant
parameters will appear. Configuration options: [Manual] [Standard] [Overclock 1%]
[Overclock 3%] [Overclock 5%] [Overclock 10%]
The CPU FSB Frequency item appears only when the AI Overclock Tuner
field is set to Manual.
Selecting a very high CPU frequency may cause the system to become
unstable! If this happens, revert to the default setting.
CPU FSB Frequency [220]
Allows you to adjust the CPU FSB operating frequency. The FSB frequency
configuration ranges from 200 to 300 MHz. Use the plus <+> or minus <-> keys to
adjust the values.
AGP Overclock in MHz [ 66]
Allows you to adjust the AGP slot clock. The AGP frequency configuration ranges
from 66 to 75 MHz. Use the plus <+> or minus <-> keys to adjust the values.
FID/VID Change [Auto]
When set to Auto, the Frequency ID and Voltage ID will be based on the rated
frequency and voltage. If you want to adjust the Processor Frequency Multiplier
and CPU voltage, set this item to Manual. Configuration options: [Auto] [Manual]
Processor Frequency Multiplier [xxxxMhz]
Allows you to set the processor frequency multiplier. The default value and
configuration options depend on the CPU installed.