Karcher K 2-350 - Manual (Page 6)

6 English
Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
 STEP 1:
Insert wheels into the body of the unit.
 STEP 2:
Slide the transport handle into place.
 STEP 3:
Attach the accessories holder.
 STEP 4:
Install the supplied connector to the
unit’s water inlet.
Note: Never attach the garden hose
connector to the unit’s water inlet!
 STEP 5:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
 Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
 STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
 STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
ASSEMBLY INSTRUCTIONS
Required tools
Assembly
OPERATING
INSTRUCTIONS