Karcher HD 13-35-4 - Manual (Page 20)

– 6
ṇ
Warning
The handgun is subjected to a recoil force
when the water jet is discharged. Make
sure that you have a firm footing. Hold the
handgun and spray lance firmly.
The appliance is equipped with the follow-
ing nozzles:

Power nozzle, 15° spray angle
– High pressure flat spray (15°) for large
dirt areas
Note
To prevent damage due to too much pres-
sure, always position high pressure ray first
from a greater distance towards object to
be cleaned.
 Pull the lever on the handgun.
 Set the working pressure and quantity
by turning the pressure/ quantity regula-
tion mechanism at the pump unit.
The working pressure can be read from
the manometer.
 Release the lever on the trigger gun.
The appliance switches off after 30 sec-
onds.
 Use the safety catch to secure the
handgun lever.
 Store the hand spray gun and spray
pipe in the accessory mount.
 After operating the water using saline
water (sea water), open the hand spray
gun and rinse the appliance for at least
2 - 3 minutes using tap water.
 Release the lever on the trigger gun.
 Set the appliance switch to "0".
 Shut off water supply.
 Activate hand spray gun until device is
pressure less.
 Use the safety catch to secure the
handgun lever.
 Remove the water inlet hose from the
appliance.
 Pull out the mains plug.
 Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
ṇ
Warning
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
Store the appliance in a heated room dur-
ing winter or empty it. During longer breaks
in operation, it is advisable to pump in anti-
frost agents into the appliance.
 Screw off water supply hose and high
pressure hose.
 Blow through machine with com-
pressed air.
Note
Observe handling instructions of the anti-
freeze agent manufacturer.

Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Push the push handle down and push
the appliance.
High pressure operation
Power nozzle
Set working pressure and flow rate
Interrupting operation
Finish operation
Frost protection
Drain water
Flush device with anti-freeze agent
Transport
Driving
20 EN