Karcher BRC 45-45 C - Manual (Page 10)

10 English
ƽ
Danger
Risk of injury and electrical shock! Repair
works may only be performed by the au-
thorised customer service.
–
Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts en-
sures that the appliance can be operat-
ed safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Alfred Kärcher GmbH Co. KG
Alfred Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Accessories and Spare Parts
Accessories Part no.:
Brush, standard 8.621-605.0
Brush, natural, soft 8.629-525.0
Manual nozzle 4.130-163.0
Spray/suction hose 4.440-644.0
Technical specifications
Performance data
Nominal voltage V 220...
240
Frequency Hz 50/60
Maximum allowed net
impedance Ohm 0.387+j
0.242
Rated power (max.) W 1725
Suction engine output W 1100
Brush engine output W 600
Speed of front brush
roller 1/min 1050
Speed of rear brush
roller 1/min 875
Detergent solution
without vacuuming I/min 0,3...
0,4
Detergent solution
with vacuuming I/min 3,5
Dimensions and weights
Working width mm 406
Brush diameter mm 86
Width mm 559
Length mm 1029
Height without push-
ing handle mm 1092
Unladen weight kg ap-
prox.
75
Noise emission
Sound pressure level
(EN 60704-1) dB(A) 73,7
Machine vibrations
Vibration total value
(ISO 5349) m/s 2 0,671
CE declaration
Product: Spray extraction device
Type: 1.008-xxx
Relevant EU Directives
2006/95/EC
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006
EN 55014–2: 1997 + A1: 2001
EN 60335–1
EN 60335–2–68
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–3: 1995 + A1: 2001 + A2:
2005
Applied national standards
-
Warranty
CEO Head of Approbation