Karcher SensorTimer TM ST6 DUO eco!ogic - Manual (Page 20)

– 4
Setting the time upon initial start-up
Note: As soon as the battery is inserted, the time flashes automatically.
 Set the hours by means of the arrow keys.
 Confirm with the OK button.
The minutes are flashing.
 Set the minutes by means of the arrow keys.
 Confirm with the OK button.
 The time is set.
Note: From now on, the receiver waits for the radio signal of the sensor for teaching. During
this time, the radio signal is flashing and the seconds countdown is counted
down.
Important: In order to establish the radio contact between the receiver and the sensor, the
sensor battery must be inserted within 60 seconds.
Ok
Ok
20 EN