Tabellenreihe, Grafik, Reverse drive – Karcher KMR 1250 BAT User Manual
Page 2: A press slowly the accelerator pedal "reverse, Operation with working lights, A switch on the working light, B switch off the working light, Sweeping with sweep roller, Sweeping even surfaces, Sweeping uneven surfaces
QUICKSTART
5.964-004.0 02/11
3
A
Reverse drive
A Press slowly the accelerator pedal "reverse".
Release the accelerator pedal, the machine
brakes automatically and stops.
4
A
B
Operation with working lights
A Switch on the working light.
B Switch off the working light.
5
A
B
Sweeping with sweep roller
Sweeping even surfaces
A Lower the roller brush; for that bring the lever
in central position (lower roller brush wear
and tear).
Sweeping uneven surfaces
B Lower the roller brush; for that bring the lever
in lower position (higher roller brush wear and
tear).
6
A
Sweeping with side brushes
A Loosen the lever lock. The side-brushes will
be lowered.
7
A
Sweeping with bulk waste flap raised
A Open the bulk waste flap manually.
8
A
Sweeping damp or wet floors
A Press wet sweeping button.
On dry surfaces:
Press the switch of the dust filter cleaning
system.
9
A
Cleaning the dust filter
A During operations, the dust filter should be
shaken and cleaned every 15-30 minutes
depending on the amount of collected dust.
Briefly press the dust filter cleaning switch.
The dust filter is cleaned for approx.
10 seconds.
Operation