Karcher KMR 1250 BAT User Manual
Quickstart, Start up, Operation
QUICKSTART
5.964-004.0 02/11
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1
A
A
B
C
Bat version
A Switch off the charger and remove the plug
from the socket.
Pull the battery cable from the charger cable
and connect it to the appliance.
Bat pack version
A Open the device hood.
B Unplug the charger from the mains.
Place the mains cable into the storage
compartment.
C Close cover.
2
A
B
C
A Open the device hood.
B Check setting of freewheel lever
C Close cover.
Operation
1
A
B
C
Starting the machine
A Sit on the driver's seat.
Do NOT press the accelerator pedal.
B Turn the ignition key to position "I" - the
battery display lights up.
C Release parking brake.
2
A
Drive forward
A Press slowly the accelerator pedal "forward".
Release the accelerator pedal, the machine
brakes automatically and stops.
KMR 1250 Bat / Bat Pack
Document Outline
- 5
- A
- B
- Sweeping with sweep roller
- Sweeping with sweep roller
- Sweeping even surfaces
- A Lower the roller brush; for that bring the lever in central position (lower roller brush wear and tear).
- 9
- A
- Cleaning the dust filter
- Cleaning the dust filter
- A During operations, the dust filter should be shaken and cleaned every 15-30 minutes depending on the amount of collected dust.
- A During operations, the dust filter should be shaken and cleaned every 15-30 minutes depending on the amount of collected dust.