Karcher Sensore pioggia - Manual (Page 12)

12 English
Î Disconnect the rain sensor from the irrigation device.
Î Reconnect the cable bridge on the irrigation device to ensure a
subsequent function without rain sensor.
The appliance is maintenance-free.
Î Completely drain all water from the rain sensor.
Î Store the rain sensor at a dry and frost-free location.
Our Kärcher branch will be pleased to help you further in the case of
questions or faults. See address on the reverse.
Finish operation
Maintenance and care
Maintenance
Storage
Troubleshooting
Fault Cause Remedy
The rain sensor will
not interrupt the pro-
gramme function of
the irrigation device. Floater in the rain sen-
sor is blocked by con-
tamination (e.g. leaves,
insects). Remove the cov-
er from the rain
sensor and rinse
the rain sensor
with clear water.
Irrigation device not
functioning. Loose connecting ca-
ble. Check the con-
nector.