Karcher HD 10-16-4 Cage Ex - Manual (Page 19)

– 6
 Connect the lifting device in the center
of the strut to load by crane.
ƽ
Danger
Risk of injury due to machine dropping.
– Check the strut for crane loading for
damage prior to each transport by
crane.
– Only lift up the appliance by the strut
when loading by crane.
– Protect the lifting device from inadvert-
ent load release.
– Remove the spray pipe with hand spray
gun prior to transporting by crane.
– The appliance must only be transported
by properly trained crane personnel.
– Do stand stand below the load.
– Ensure that no persons are present in
the immediate vicinity of the crane.
– Do not leave the appliance on the crane
unattended.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
ṇ
Warning
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
For longer work breaks or if a frost free stor-
age is not possible:

Drain water.
 Flush device with anti-freeze agent.
 Screw off water supply hose and high
pressure hose.
 Operate device for max. 1 minute until
the pump and conduits are empty.
Note
Observe handling instructions of the anti-
freeze agent manufacturer.

Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
ƽ
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract.
Please take advice on this matter.
 Check oil level of the high pressure
pump.
The oil level must be between the “MIN“
and “MAX“ markings on the oil contain-
er.
 Add oil if required (see technical speci-
fications).
ṇ
Warning
In case of lacteous oil inform Kärcher cus-
tomer service immediately
 Clean filter at the water connection.
 Clean filter at the detergent suck hose.
 Check the swimmer valve in the swim-
mer container for leaks.
 Change the oil in the high pressure
pump.
 Change the oil in the high pressure
pump.
Transport by crane
Storage
Shutdown
Drain water
Flush device with anti-freeze agent
Maintenance and care
Safety inspection/ maintenance
contract
Maintenance intervals
Daily
Weekly or after 40 operating hours
After 50 operating hours
monthly or after 500 operating hours
19 EN