Ferguson AV290DVD - Manual (Page 25)

21
ENGLISH
Digital Audio Setup
The options included in Digital Audio
Setup are: { Digital Output } and { LPCM
Output }.
A
In ‘Audio Setup Page’, use   keys to
highlight { Digital Audio Setup }, then
press .
B
Use   keys to select an option.
C
Press  to enter into the submenu.
D
Press   keys to select a setting.
 { Digital Output }
Select this if you connect to a
multichannel decoder/receiver.
{ SPDIF/Off } - To deactivate the digital
audio output. For example, if you use the
AUDIO OUT sockets to connect to a TV or
stereo system.
{ SPDIF/RAW } - Select this if the con-
nected device has a built-in multichan-
nel decoder that supports one of the
multichannel audio format (Dolby Digital,
MPEG-2).
{ SPDIF/PCM } - Select this if the connect-
ed device is not capable of decoding mul-
tichannel audio. Ferguson will convert the
Dolby Digital and MPEG-2 multichannel
signals to PCM (Pulse Code Modulation).
Helpful Hint:
 If { Digital Output } is set to { SPDIF/RAW },
all audio settings except MUTE are invalid.
 { LPCM Output }
Select this if you connect to a PCM
compatible receiver. Discs are recorded
at a certain sampling rate with the higher
sampling rate, the better sound quality.
{ 48K } - Select this if the playback disc is
recorded at a sampling rate of 48kHz.
{ 96K } - Select this if the playback disc is
recorded at a sampling rate of 96kHz.
General Setup menu
A
In mediaplayer mode, press SETUP.
B
Press   to select ‘General Setup Page’
icon.
GENERAL SETUP
ANGLE MARK
ON
CLOSE CAPTION OFF
SCREEN SAVER ON
LAST MEMORY ON
VERSION
DEFAULT
GOTO GENERAL SETUP PAGE
Restoring to original settings
Setting the { Default } function will reset
all options and your personal settings
to the factory defaults, except your
password for Parental and Disc Lock.
A
In ‘Preference Page’, use   keys to
highlight { Default }, then press  to
select { Reset }.
B
Press OK to confirm.
 All settings will now reset to factory
defaults.
Helpful Hint:

To restore factory settings when TV is not
connected press DEFAULTS button on
RCU.
Setup Menu Options