Ferguson Cute9 - Manual (Page 28)

24
ENGLISH
DVD Setup Menu Options
Restricting playback by Parental
Control
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are form 1 to 8 and are
country dependent. You can prohibit
the playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
A
In ‘PREFERENCE PAGE’, press  to
highlight {PARENTAL}, then press .
B
Press  to highlight a rating level for
the disc inserted and press OK
 To disable Rating level and have all
Discs play, select {8. Audlt}
C
Use the numeric keypad (0-9) to enter
the password
 DVDs that are rated above the level you
selected will not play unless you enter
your six-digit password.
Helpful Hints:
 VCD, SVCD, CD have not level indication,
so parental control function has no effect
on these type of discs. This applies to
most illegal DVD discs.

Some DVDs are not encoded with a rating
though the movie rating may be printed
on the Disc cover, The rating level feature
does not wortk for such Discs.
Changing the Password
The same password is used for both
Rating setting and Disk Lock, Enter your
password when prompted on the screen,
default password is 0000.
A
In ‘PREFERENCE PAGE’, press  to
highlight {PASSWORD}, then press  to
select {CHANGE}.
B
Press OK and the menu appears.
C
Use the numeric keypad (0-9) to enter
your old six-digit password.

When doing this for the first time, Key
in ‘0000’.
 If you forget your old six-digit
password, Key in ‘0000’.
D
Enter the new password.
E
Enter the new password a second time to
confirm.
 The new password will now take effect.
F
Press OK to confirm.
Restoring to original settings
Setting the { Default } function will reset
all options and your personal settings
to the factory defaults, except your
password for Parental and Disc Lock.
A
In ‘Preference Page’, use   keys to
highlight { Default }, then press  to
select { Reset }.
B
Press OK to confirm.
 All settings will now reset to factory
defaults.